Seaming kit
Install suppliesPU adhesive with hardener plus seam tape. Pot life and mix ratio stated on the delivery note.
- Adhesive
- 12 kg + 1.2 kg hardener typical
- Mix
- 90:10
- Tape
- 0.3 m × 100 m
Surface 12 · Install kit
Glue, tape, infill and sand - quoted with the surface, not hunted later.
Seaming adhesive, tape, SBR granules and silica sand sized to the system. The same items we use on OSMS installs, available on the take-off.
- Adhesive
- PU seaming
- Tape
- Seam rolls
- Infill
- SBR + silica
- Shock pad
- Where specified
Overview
Install supplies
Most pitch failures that look like ‘bad turf’ are bad seaming or starved infill. We sell the consumables as a kit matched to the yarn, so the install crew is not mixing brands on site.
01
Matched chemistry
Adhesive and tape chosen for the backing you actually bought.
02
Infill by system
SBR and silica quantities come from the football or hockey spec, not a round number.
03
Shock pad when needed
10 mm pads and EVA rolls are on the same quote when the system calls for them.
04
Used on our crews
We do not stock a consumer aisle of mystery glue.
Our products
Install supplies constructions
Most pitch failures that look like ‘bad turf’ are bad seaming or starved infill. We sell the consumables as a kit matched to the yarn, so the install crew is not mixing brands on site.
Infill pack
Install suppliesSBR rubber granules and silica sand batched to the pitch area and the yarn height.
- SBR
- Performance infill
- Silica
- Engineered grain
- Non-infill
- Silica only ~1.4 kg / sqft
FAQs
Asked often.
Still deciding the construction? Send drawings or a site pin and we will map it to a published system.
Other surfaces
Specify Install supplies for your site.
Share drawings, sport mix and weekly hours. You will get a documented system and a material take-off.