Synthetic running tracks
Two polyurethane track systems. One geometry that holds a record.
ProLane is the OSMS athletics line: a cost-true sandwich system for schools and state arenas, and a full-PUR pour for stadiums that need World Athletics Class I behaviour.
- Systems
- Sandwich · Full PUR
- Chemistry
- 100% MDI
- Cushion
- 8–10 mm
- Standard
- World Athletics
Engineered for speed. Built for champions.
Overview
ProLane
Track geometry is unforgiving - a few millimetres of drift invalidates a time. ProLane is poured after total-station lane setting, on a bound asphalt or concrete base, with MDI polyurethane throughout. No TDI. No solvent. No heavy metals. The Sandwich system puts an SBR elastic raft under a coloured EPDM wear face. The Full PUR system is a homogeneous polyurethane pour with an EPDM broadcast - the preferred stack for Olympic and international-standard stadia.
Durable
Wear-resistant EPDM broadcast and a seamless PU body that holds through Indian heat and monsoon.
Innovative
Sandwich or full-pour specified to the same geometry - only the cushion chemistry changes.
Certified quality
Shock absorption, tensile strength, force reduction and vertical deformation aimed at IAAF surface requirements.
Clean chemistry
Solvent-free MDI polyurethane, heavy-metal free, specified for schools as well as stadia.
- Made from 100% MDI - no TDI
- Solvent-free and eco-friendly
- All-weather, all-temperature service
- Arena, stadium and school standards
- Free of lead, cadmium, chromium and mercury
- Odorless pour on a documented programme
The range
How a ProLane track is built
Open a system for the coat stack, thickness bands and material take-off. The base is always surveyed first.
Athletic track solution
Sandwich system
An SBR elastic layer sealed and bonded under a coloured EPDM finish. Soft underfoot, wear-resistant on top, and the practical specification for schools, colleges and state-level arenas.
Schools, colleges, municipal and state arenas
- Cushion
- 9 mm typical
- Wear face
- EPDM 2–4 mm
- Base
- Asphalt or concrete
- Use
- School to state arena
| Material | Dosage | Note |
|---|---|---|
| Primer | 0.2 kg/m² | Film |
| SBR granules 2–4 mm | 7.5 kg/m² | Cushion 9 mm |
| PU binder | 0.95 kg/m² | - |
| PU sealer coating | 1.8 kg/m² | Sealer ~4 mm with powder |
| SBR powder | 0.5 kg/m² | - |
| EPDM granules 2–4 mm | 3.5 kg/m² | - |
| PU self-levelling | 2.6 kg/m² | - |
| Drier | 0.05 kg/m² | - |
| Line paint | 0.01 kg/m² | - |
Build-up
- 01
PU white line paint
Outdoor lining, 50 mm typical lane marks.
- 02
Coloured EPDM finish
2–4 mm · Broadcast wear coat.
- 03
Bonding layers
~1 mm · Upper and lower wet-pour MDI PU.
- 04
Wet-pour sealer
~0.5 mm · MDI PU with SBR rubber powder.
- 05
Elastic layer
8–10 mm · MDI PU binder with SBR 2–4 mm.
- 06
Primer
MDI PU on asphalt; waterproof coat on concrete.
- 07
Bound sub-base
Asphalt or concrete, laser-regulated.
Fit
Where this line belongs.
School & college tracks
Four to eight lanes on a sandwich system, built to a calendar and a maintenance budget.
State and municipal stadia
Sandwich or full PUR after a base survey - geometry first, then chemistry.
International competition
Full PUR with documented force reduction, aimed at World Athletics Class I.
Documentation
- World Athletics / IAAF surface requirements
- 100% MDI polyurethane - no TDI
- Solvent-free, heavy-metal free
- ISO 9001 · ISO 14001
FAQs
Asked on this line.
Other OSMS product lines
Specify a ProLane track for your stadium.
Share drawings, lane count and the certification target. You will get a sandwich or full-PUR build-up and a material take-off - not a generic running-track quote.