15 mm putting golf turf (dark green)
Golf turf15 mm PE 8,800 dark-green putting face.
- Pile height
- 15 mm ± 1%
- Gauge
- 3/16 inch
- Stitch rate
- 33/10 cm ± 3%
- Density
- 71,500 / m² ± 3%
- Dtex
- PE 8,800
Putting turf
Putting turf specified as 15 mm PE, not leftover landscape yarn.
Two putting constructions from the OSMS golf sheet: dark green PE 8,800 and light green PE 6,200, both on a 3/16 inch gauge.
- Pile
- 15 mm
- Faces
- Dark · light
- Gauge
- 3/16 inch
- Use
- Putting greens
Overview
Golf turf
Golf turf here is a putting face. The two SKUs below are the products published on osmsturf.com/golf-turf.php.
01
Two published faces
Dark green PE 8,800 and light green PE 6,200 — same 15 mm pile, different yarn mass and stitch.
02
Putting, not a fairway carpet
Specified for greens and practice putting, not as a football remnant.
03
3/16 inch gauge
A tight gauge for a true roll on a dressed green.
04
Quoted with the pad
Base, falls and dressing are part of a putting green, not extras.
Our products
Two putting constructions, as listed on OSMS Turf.
Dark green and light green 15 mm faces — pile, stitch, density and Dtex from the live golf sheet.
15 mm putting golf turf (light green)
Golf turf15 mm PE 6,200 light-green putting face.
- Pile height
- 15 mm ± 1%
- Gauge
- 3/16 inch
- Stitch rate
- 30/10 cm
- Density
- 69,500 / m² ± 10%
- Dtex
- PE 6,200
FAQs
Asked often.
Still deciding the construction? Send drawings or a site pin and we will map it to a published system.
Other surfaces
Specify Golf turf for your site.
Share drawings, sport mix and weekly hours. You will get a documented system and a material take-off.